100% Biker & Trike Magazine Forums

Go Back   100% Biker & Trike Magazine Forums > 100% Biker > The Workshop

Notices

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 28-03-2017, 06:32 PM
Tricky-Dicky Tricky-Dicky is offline
Chatter Box
 
Join Date: Dec 2016
Location: Norfolk
Posts: 281
Default Groan! clutch woes!

All working fine with the Trident T160 bobber..............apart from clutch drag, which is preventing me getting it out of first, doesn't feel draggy when kicked over with the clutch in, but no adjustment will stop it, and i am now certain that there is enough overall movement in the clutch mechanism to disengage properly.

So i am now thinking its down to either a worn plate causing to much spring tension, or the plate is badly warped causing the drag, anyway its a strip down to have a look, and already found one bodge.......primary chain tensioner bolt has been striped out and now has just a captive bolt welded to a small flat plate with a coach bolt to act on the tensioner, not terrible but i now know why i couldn't cure the leak from the tensioner bolt.
Reply With Quote
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT. The time now is 03:44 PM.


Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.