Thread: Fork repairs
View Single Post
Old 13-01-2016, 10:18 AM
wiskers wiskers is offline
Jedi Chat Master
Join Date: May 2006
Location: Caerphilly
Posts: 696

The way I put the progressive springs in is with the tight coils at the top

Welcome to the forum

Hope this helps Dai

Just had a thought when filling forks do it before you put the springs in if you have the measurement use what is specified if not fully compress the legs then fill to about 15_2" from the bottom of the threads

This is the way i do it could be wrong but it works for oil I use agricultural mineral two stroke sae 30

This is for normal right way up forks never done upside down one's

Again hope this helps Dai
Dyslexic Dai

Last edited by wiskers; 13-01-2016 at 12:31 PM. Reason: Bit about oil
Reply With Quote