View Single Post
  #9  
Old 02-12-2015, 08:53 AM
roverv8trike roverv8trike is offline
Chat Virgin
 
Join Date: Sep 2015
Location: Nambour sunshine coast Queensland Australia
Posts: 7
Default

G'day all. I spent an hour today making a template for the rear of the rover block to transfer to the adaptor ring & drilled it to bolt onto the block. I have to have a 12mm thick spacer made up to space the torque convertor out from the crank & have some fixing brackets welded to the torque convertor to bolt it up to the rover flexplate. I will post some pics next week with the auto bolted up along with the rear suspension.
Reply With Quote