100% Biker & Trike Magazine Forums

100% Biker & Trike Magazine Forums (http://www.100-biker.com/forums/index.php)
-   The Workshop (http://www.100-biker.com/forums/forumdisplay.php?f=5)
-   -   Wiring question. (http://www.100-biker.com/forums/showthread.php?t=51624)

Tricky-Dicky 09-06-2017 12:43 PM

Wiring question.
Having trouble getting my head around this one, don't usually have problems with wiring, but in this case i am not sure,
The question is, i am going to fit a a relay to use as an ignition cut, but i want to fit a digital volt meter to the positive side of the trigger circuit of the relay as it will be powered from the ignition switch, but my worry is that will the earth side of the volt meter act as the earth and trigger the relay?

Tricky-Dicky 09-06-2017 03:14 PM

Looks like it may not be a problem now, as i cant position the volt meter where i originally wanted it.:(

strima 09-06-2017 03:57 PM

Depends on the impedance of the voltmeter. Hope that clears it up... :D

All times are GMT. The time now is 01:58 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.