100% Biker & Trike Magazine Forums

100% Biker & Trike Magazine Forums (http://www.100-biker.com/forums/index.php)
-   Biker Chat (http://www.100-biker.com/forums/forumdisplay.php?f=7)
-   -   S&S Experts? (http://www.100-biker.com/forums/showthread.php?t=51499)

choppaholic 01-01-2017 03:32 PM

S&S Experts?
 
Does anyone know of an S&S expert lurking amongst us ? I went for a quick new years eve ride yesterday and she stumbled and sounded like she was only firing on one. I pulled over and she still managed to tick over. I decided to nurse her back home but she died about 1/4 of a mile short of home.... she still turned over and I had 2 sparks with the plugs out, any ideas ?

strima 01-01-2017 04:06 PM

Sounds like a fuel problem. Have you got fuel at the carbs? Could be some crap in the system or even water.

choppaholic 01-01-2017 04:42 PM

Thanks Strima, it's just back from the menda's, started ok and was going great, then it went as previously described, I emptied the bowl which was full of clean fuel...

strima 01-01-2017 06:36 PM

I'd take a look at the fuel pipes, they could well be blocked. As I'm not familiar with the set up I can only give out the basics but certainly sounds like fuel starvation.

Also check the breather on the filler if it has one.

choppaholic 01-01-2017 06:40 PM

Cool, I might just renew the fuel lines... the bowl was full though?

harry 01-01-2017 08:01 PM

Logic would suggest that if you have sparks and fuel in the float bowl that the next check would be the jets to see if they are blocked.

strima 01-01-2017 08:27 PM

Could also be a partially blocked pipe that doesn't fill the bowls quick enough when running. As the bike runs well enough until the bowl gets empty I would be leaning towards a partially block fuel pipe.

Rather than replace the pipes start by running a pipe cleaner through them.

choppaholic 01-01-2017 09:15 PM

Good ideas, keep them coming :) Just for info there's an inline filter between the tank and carb.... why did it seem like one cylinder seem to stop first, mind you, when it all started she still managed to tick over roughly back onto 2 cylinders... so just enough fuel to tick over but as soon as you try to gas it it gets starved. Why does only 1 cylinder get starved ?

Tricky-Dicky 01-01-2017 10:48 PM

Does sound like a fuel starvation issue, although its equally possible that its could be a sticky float valve which could cause too much as well as too little fuel, both of which could cause the cut out.

One cylinder could be bias in its intake, so the other has not enough/or too much fuel to fire, as said check fuel is getting from the tank to the float bowl, and clean/blow out the idle and main jets, there is a basic setup guide here,https://www.sscycle.com/tech-info/in...rb-quick-guide

Friar Tuck 02-01-2017 06:42 AM

Flooding possibly?

Tricky-Dicky 02-01-2017 09:39 AM

The trouble is the S&S is based on the old Tilitson design, i swapped the one on my old Sprtster for an new type Amal and that made it a lot easier to start.

choppaholic 02-01-2017 09:46 AM

Thanks for all the suggestions, I'm now armed with a few ideas. I'll let you know how I get on... if I get on :)

Peirre 04-01-2017 12:21 PM

Could there be moisture of something blocking the tank vent, causing a vacuum in the fuel supply?

choppaholic 04-01-2017 06:03 PM

Thanks piere, I've taken the bull by the horns and booked her into West Coast Harley in Glasgow, they're picking her up on Tuesday 10th.

choppaholic 04-01-2017 06:04 PM

Correction... peirre

Strider 04-01-2017 08:39 PM

Carb icing???

choppaholic 04-01-2017 11:36 PM

Strider... more like carb well and truly ballsed up by people who haven't got a clue (so called local bike mechs) :)

SS2 05-01-2017 01:21 PM

You tried Jim Hay in Aberdeen? Supposed to know his onions.

choppaholic 05-01-2017 07:10 PM

My pal has just had some 1st class work carried out by West Coast out on his big dog K9 which nobody local has the facilities to do so I'll give em a chance and see what happens

SS2 06-01-2017 12:31 PM

Good luck with it. I've only had good experience with West Coast so I'm sure you'll get sorted. I just thought your local Indy might have been the obvious choice.

choppaholic 06-01-2017 06:00 PM

Sounds good, where are you based? The local indy would be ideal but 2 not so good experiences have made me look further afield. West Coast will sort me out so I can get out with confidence this summer ;)

SS2 08-01-2017 05:42 PM

I'm in Newcastle but your local Indy is Jim Hay in Aberdeen going off your profile. http://www.jimhaymotorcycles.com/1021/frames.php

I've not used him but he's got a good rep. There's one of his stickers in my service book as my Harley's last owner was from Aberdeen which is why the name always sticks in my mind.

choppaholic 12-01-2017 12:53 PM

Cheers for the info, I'll keep him in mind

choppaholic 19-03-2017 06:48 PM

Sorted !
 
New ignition barrel, coil, leads, plugs, LED turn signals, LED Daymaker headlight, complete re-wire from front to back and a new battery. Starts and runs like a bullet !

Problem was ... just about everything was wired up badly or completely wrong altogether! The compression release on both cylinders were wired up wrong too.

Thanks to West Coast I now have a bike :)

Tricky-Dicky 19-03-2017 06:59 PM

Glad to hear it...enjoy!

choppaholic 19-03-2017 07:36 PM

Thanks Tricky. ;)

choppaholic 19-03-2017 08:45 PM

1 Attachment(s)
I'm happy ... for now :)

Friar Tuck 20-03-2017 05:57 AM

Now all you need to do is change the bars, change the forks, change the saddle, change the engine, chop the frame....Oooh look a new custom....

Enjoy the bike as is, matey!

Oh and change the oil! most important that...

Tricky-Dicky 20-03-2017 10:02 AM

You have to admit for a factory chop they are pretty nice.

choppaholic 20-03-2017 10:26 AM

Think I'll leave her be now and enjoy the summer :) cheers all ...


All times are GMT. The time now is 07:01 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2017, vBulletin Solutions, Inc.