100% Biker & Trike Magazine Forums

100% Biker & Trike Magazine Forums (http://www.100-biker.com/forums/index.php)
-   Biker Chat (http://www.100-biker.com/forums/forumdisplay.php?f=7)
-   -   Here is the long awaited funding page for CBRTIM (http://www.100-biker.com/forums/showthread.php?t=51269)

Creature 07-04-2016 12:37 AM

Here is the long awaited funding page for CBRTIM
Here is the long awaited funding page for CBRTIM in association with our good friend Mr Stephen Osborn also known as Mr Creature. Please help us to make this project a success


Creature 18-04-2016 12:56 AM

5 Attachment(s)
Latest update on CBRTIM :) :)

Friar Tuck 19-01-2017 06:13 AM

How is CBRTIM coming along?

Creature 19-01-2017 07:24 AM

Unfortuantly we have run out of funds for now, and not sure when will have any spare either :) :)

On the good side, I have taken the chance of bringing him home, and am in the process or remarking my existing pathways, so that when he finally goes back and is finished, he will have a nice home to go to.

My current workshop, altho is of a nice size, is just to small :( :( and needs extending.

I have around 8 foot of plastic roofing and all the cross members and if we can get them out the uprites as well.

Currently there is a wooden slatted floor (decking), that I will hopefully be able to use :) :)

As we have to remove the outside extention from my Mothers Bungaloo, before its returned to the council in 4 weeks time.

But at moment all my spare time is sat by my mum as she hopefully passes away peacefully

Sir Ewok 19-01-2017 02:20 PM

Sorry about your Mum, I had to do the same with mine. It's not easy but in the end it is good that they are at peace.

Creature 30-01-2017 02:54 PM

due to some unexpected sales of some of my cds that i thought not worth anything some turned out to be collectors or rare so people paid more :) :)

I have enough funds to restart on CBRTims Petrol tank, which was dropped of by a close friend who was heading that way. Progress will be spotty as limited by funds, but if things keep going as they are hopefully have it all done, pressure tested and maybe some primer to protect it :) :)

Updates as I get them :) :)

All times are GMT. The time now is 07:51 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.