100% Biker & Trike Magazine Forums

100% Biker & Trike Magazine Forums (http://www.100-biker.com/forums/index.php)
-   Biker Chat (http://www.100-biker.com/forums/forumdisplay.php?f=7)
-   -   norvin frame (http://www.100-biker.com/forums/showthread.php?t=38191)

dracken1 26-02-2009 08:05 PM

norvin frame
here is our modified norvin frame. when this engine is put into a manx frame the centre of gravity is quite high. and there are always front exhaust pipe issues with the down tubes, by altering the angle of the down tubes and the engine cradle we have managed to lower the engine over 1.5" and the altered angle down tubes eliminate clearance probs with that front exhaust.
this engine will be having a bsa box behind it. and over the weekend we will be mocking it up with spondon multipiece yokes , upside downies and a pair of dymag wheels. with one of our oval swingarms.
the frame as all our frames is made from t45 tubing. we usually use 1 1/8" 17g tube. this one is 16g.
the frame less swing arm weighs in at 9.5 kg

if you are unsure of what t45 spec tube is you can read about it at this link

kitkat 26-02-2009 08:11 PM

Very nice :thumbu:

shaggy696969 26-02-2009 08:26 PM

Very clever look forward to the mock up pic's

minxy 27-02-2009 02:10 AM

Aw mate.


Timbo 01-03-2009 09:30 PM

Want want want it:D

johnr 02-03-2009 07:47 AM

mmmmmmmmmmmmmm, shiney pretty things with hrd written on them, droooool!!!:thumbsu:

Bosun 02-03-2009 05:41 PM


All times are GMT. The time now is 01:27 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.