100% Biker & Trike Magazine Forums

100% Biker & Trike Magazine Forums (http://www.100-biker.com/forums/index.php)
-   The Workshop (http://www.100-biker.com/forums/forumdisplay.php?f=5)
-   -   Xj 600 (http://www.100-biker.com/forums/showthread.php?t=26105)

2483steve 24-01-2007 03:58 PM

Xj 600
Brought a XJ 600 import on ebay as non-runner tracked problem down to timing being nearly 40 degrees out, there are 4 digit prefixs on the CDI and the rotor,1227 and 1225, I am assuming that these numbers should match, if they are then I know which way to go. Hope somebody has come across this problem before.
Thanks Steve

trophydave 24-01-2007 04:36 PM

I have the same bike,also from fleabay.It has took a bit of work but is now on the road.If you want me to have a look at anything give us a shout.

devon-tony 24-01-2007 09:12 PM

just had a quick look through some bits and theres at least 3 different cdi for the XJ600 range

could be that the sender on the end of the crankshaft isnt located properly, or is the wrong one?

All times are GMT. The time now is 12:45 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2018, vBulletin Solutions, Inc.