PDA

View Full Version : Hi from Oxfordshire


STEALTH K3
09-09-2013, 03:44 PM
Hi just like to introduce myself and my bike its a 1340 1991 Softail I was looking around for a while for the bike I am into more into the industrial looking no chrome etc.

I bought the bike of someone I half know from through a friend of a friend the previous owner had the bike for 6 years and covered only 1500 miles and the bloke before him had it for about 3 years or so.

http://i15.photobucket.com/albums/a395/philip01235/T2eC16RsE9swmZpKBSDUQeqL2w60_12_zpsccf2c6b4.jpg (http://s15.photobucket.com/user/philip01235/media/T2eC16RsE9swmZpKBSDUQeqL2w60_12_zpsccf2c6b4.jpg.ht ml)

http://i15.photobucket.com/albums/a395/philip01235/KGrHqRrYFIKkNBNSFBSDUQ6urVg60_12_zps77cd3c5f.jpg (http://s15.photobucket.com/user/philip01235/media/KGrHqRrYFIKkNBNSFBSDUQ6urVg60_12_zps77cd3c5f.jpg.h tml)

http://i15.photobucket.com/albums/a395/philip01235/KGrHqVk8FH6QCZ4q1BSDURW2gG60_12_zpsc6c3b6f6.jpg (http://s15.photobucket.com/user/philip01235/media/KGrHqVk8FH6QCZ4q1BSDURW2gG60_12_zpsc6c3b6f6.jpg.ht ml)

Friar Tuck
10-09-2013, 07:11 AM
Neat!

Greetins frum Naarfuck!

John Hopkins
10-09-2013, 11:58 AM
Hi welcome to the forum..

Fill in the User CP up there on the left so we know where you are in case you need or offer help..

Also it looks from those photo's like you could use a side stand puck for parking on grass, I use a metal plate about 3"x5" some use a piece of wood..

John.

STEALTH K3
10-09-2013, 02:55 PM
Hi welcome to the forum..

Fill in the User CP up there on the left so we know where you are in case you need or offer help..

Also it looks from those photo's like you could use a side stand puck for parking on grass, I use a metal plate about 3"x5" some use a piece of wood..

John.

Hi the photo was taken for the advert poir to me buying the bike I will get a puck as you never know where you will end up

Nufkamp
10-09-2013, 03:51 PM
Done be posh and buy a puck, use a flattened beer can :)

wiskers
11-09-2013, 08:03 AM
Drill hole in puck tie string to puck long enough to tie to bars sit on bike untie from bars lift bike from stand pull string wrap round puck put in pocket

Saves bending and also losing puck

Did i say welcome Dai

John Hopkins
11-09-2013, 11:07 AM
Drill hole in puck tie string to puck long enough to tie to bars sit on bike untie from bars lift bike from stand pull string wrap round puck put in pocket

Saves bending and also losing puck

Did i say welcome Dai

Ok smartarse..how do you get it back under the sidestand without bending when you stop.

John.

John Hopkins
11-09-2013, 11:10 AM
Smartarse reply..

Make string longer, throw puck in front of bike, ride up to puck, kick sidestand out to land on puck..

Saved you a bit of typing Dai.

John.

John Hopkins
11-09-2013, 11:15 AM
Or,

Open can, drink beer, crush can, Throw can in front of bike, land stand on can, if you miss the can open another and repeat until (a) you hit the can (b) you run out of cans or (c) you fall off the bike.

John.

wiskers
11-09-2013, 04:23 PM
Thanks John
Knew you'd get the idea

Friar Tuck
19-09-2013, 06:20 AM
Pucks? Isn't that wot they use in Ice Hockey?