taking the old paint off old calipers

[2rabbits]

Is there a lazy man's way of stripping all the old paint from calipers (1980s GS1000 in this case)?
I've done previous calipers with a toothbrush and paint stripper in the nooks and crannies, and bits of sandpaper wrapped round various size screwdrivers! I just don't have the spare time at the moment and need these done so I just wondered if there's something you can just dip the whole caliper in and....er .... it comes out all clean and ready to paint......um........ I'm dreaming aren't I !!!
Any interesting methods anyone has used would be welcome.
Cheers.

[John Hopkins]

nitromors..use it as a dip for about 30 mins then wear rubber gloves to remove any deep cracks with a wire brush..if about 10 coats repeat.

John.

[strima]

As above. Remove old seals etc and strip as best you can. Refit with new seals and stainless pistons and you'll never need to worry about them again.

[John Hopkins]

As Strima says take anything that isn't metal off otherwise it will give it an uneven non removable black coating..Nitromors disolves plastic, rubber, tar, and skin..

John

[V8George]

- which makes it brill for knackered frying pans and decoking pistons/valves etc----------