Suzuki bits for sale

[C Dean]

More clearout... Offers?

GS shaft output cover
GS oil filter cover
GS ignition cover
GS brake callipers (model unknown)
GS CDI unit (in new box)
Bandit 600 down pipes
GS 650 side panel badge
Sump - ? GSX750ET?
GS 850/1000 cams
GS 850/1000 full chrome Motad exhaust system
GSX 750/1100 carb rubbers x 2
TL1000R -W swing arm
GSX1100EFE front end - top yoke only, wheel, callipers, discs, forks
GSXR 1100H sump
GSXR 1100H cam cover (polished)
GSXR 1100H standard pistons x 3
GSXR 1100 (early "slabside" 1052, import) - clocks (Km p/h), full replica fibreglass fairing, fairing mounts, frame and V5, front twin lights, 4 x indicators, LH mirror, rear calliper/disc (Goodridge), tank (filler cap hole damaged), LH and RH front master cylinders, gear/brake pedals/hangers, front end (ex wheel, inc disc, Nissan callipers, yokes, Goodridge).
GSXR 1100 (early "slabside" 1052) JMC double-braced swing arm to take GSXR 1127 3-spoke wheel.
GSXR 1127 3-spoke front and rear (160 tyre) wheels
GSX 1100F 1127 complete motor
GSXR 1100W carb rubbers
Bandit 1200 down pipes
Hyabusa pistons x 4 (should fit Bandit 12 or GSXR 1100 at 4mm oversize)
Hyabusa fuel pump


Text/Tel 07743373441 pref eves/w'ends
S.Yorks area

[Choprocker]

Chuck this ad on www.oldskoolsuzuki.info i reckon u might get some results.
John, gsxr rocker.

[minxy]

dribble drool

[minxy]

Serious talk here .... can you give me a price for the following (bulk) :-
GS 850/1000 full chrome Motad exhaust system
GSX 750/1100 carb rubbers x 2
GSXR 1100H sump
GSXR 1100H cam cover (polished)
GSXR 1100H standard pistons x 3
GSXR 1100 (early "slabside" 1052, import) - clocks (Km p/h), full replica fibreglass fairing, fairing mounts, frame and V5, front twin lights, 4 x indicators, LH mirror, rear calliper/disc (Goodridge), tank (filler cap hole damaged), LH and RH front master cylinders, gear/brake pedals/hangers, front end (ex wheel, inc disc, Nissan callipers, yokes, Goodridge).
GSXR 1100 (early "slabside" 1052) JMC double-braced swing arm to take GSXR 1127 3-spoke wheel.
GSXR 1127 3-spoke front and rear (160 tyre) wheels
GSX 1100F 1127 complete motor
GSXR 1100W carb rubbers
Bandit 1200 down pipes

If you'd prefer, you can pm me through this forum or I can ive you a call once you've had a think on £. Cheers.

[Choprocker]

You opening a fvcking breakers or summat minxy?
Or gonna pass em on to the boys on oss?
Lol

[minxy]

Never you mind :p

I had a clear out in the shed last week and realised I am down to the odd gixer switchgears, a set of hangers for an ez and a couple of slabby front brake discs (not matching) and could have cried. I NEED MORE SPARES. Just in case like lol ..... Plus the fact that 1 the chop is being rebuilt and I need some of the bits for that and 2 the slabby's getting some serious tlc this summer too so ner ner.

git

[C Dean]

Minxy - Sent you a PM - best text your number to the one I've given or give him a bell one night - it's the other half you need to speak to as they're his bits really (just doing his dirty work as usual!)
Cheers.

[minxy]

Received and responded. Cheers :)

[C Dean]

Minxy - [quote] I had a clear out in the shed last week and ... I NEED MORE SPARES. Just in case like lol ..... Plus the fact that 1 the chop is being rebuilt and I need some of the bits for that and 2 the slabby's getting some serious tlc this summer too so ner ner.

We've got an entire garage of spares we need to clean out - see my other adverts, if any use. Then we can get on with building/upgrading a few more too...
Cheers, CD.

[minxy]

Clair

I did email you on the address I *think* you gave me but no response. Can you pm me with your addy?

Cheers

[mr.chaz]

I need the plastic trim , that's on the back of the light cluster dummy board on a GS650if you have one. Same as 550 ,750 etc.

Wot u got , have you got????? :D

Please , thank you.

[keith_t]

Are the cams for the GS850 the same as the ones for a GS750?