Fayji, you put a curse on me;

[Taff]

theres a "Y" piece on the rear pot
enthusiastic riding splits this
it can be welded, or else £148 ouch
replacement and bust
http://img518.imageshack.us/img518/9894/p1120256medium2374e0f8ma0.png



Two weeks, and 900 miles of possibly somewhat over enthusiastic riding later, on me new bike; :eek: :mad:

http://img442.imageshack.us/img442/517/picture065cf6.jpg

[Pugwash]

Fayji was last seen being enrolled in the Witless Protection Programme :p

[minxy]

Blimey :eek: ....

[Kylie]

Ouch!
........

[knuckle]

A weld is fine Taff but check that the LH exhaust tab bracket (Part#65619-98) is not on the way to breaking point as well. (fig #18) below.

11329
11330



11331

Another option is to remove the pipe going out to the LHS altogether and just run a 2 into 1. Saves about 30lb in weight and bike will run just as well.

[Bosun]

sorry mister, wasnt me honest
i nearly went down this route, as cheaper than the other tru duals
http://www.fullsac.com/truedualinstall.html

[frenchie]

feck me, they are actualy talking motorbikes

fren

[Peirre]

feck me, they are actualy talking motorbikes

fren
tut ........ standards are slipping ;)

[shaggy696969]

If thats a vibration crack, surely any replacement wouldnt put up with your "enthusiatic riding style" either, is it worth it to have the twin pipes ???

[Bosun]

thay say there are various reasions why it happens
lose brackets/putting exhaust on wrong, lose exhausts, lose engine mounts
any excuse but "its a bad design by moco"

[Taff]

If thats a vibration crack, surely any replacement wouldnt put up with your "enthusiatic riding style" either, is it worth it to have the twin pipes ???


I been thinking that an all, gonna get it welded up when me weld monkey's back from abroad, and check out what others running a Faggot Glide have done about it.
Anything but ride slower...

[brandersnatch]

Weld it up with a bracing piece in there, should do the trick. Worked on my mates one.

[pyro]

Leave it off...... neighbours will love you....:D

[Taff]

Got it off, decided against riding it the 40-odd miles to me welder mate, i never had full confidence it'd make it, to the end of our road.
Taken it right off and took it local instead;

http://img256.imageshack.us/img256/6567/picture066ta6.jpg

[krammer]

Alright, i'll show me ignorence. How has 'enthusiastic' riding caused that then?

[shaggy696969]

High vibration, as the Bikes not going Potato potato .......... more like spudspudpsudpsud at a very fast rate. :D and the useless side of the pipe as the gasses will travely the fastest route just sits there vibrating in the wind. :blink:

[krammer]

High vibration, as the Bikes not going Potato potato .......... more like spudspudpsudpsud at a very fast rate. :D and the useless side of the pipe as the gasses will travely the fastest route just sits there vibrating in the wind. :blink: Cheer's for the explanation mate.

[Grav]

Trust Fayji to find a company called Full Sac Performance.....

Dirty bastard.......