my trike

[master_of_wishes]

Hi there,just wanted to put a pic up of my nearly finished project,jobs left to do are paint the mudguards(now ive filled them)wire it up and get a number plate made.anyway here it is http://i141.photobucket.com/albums/r50/master_of_wishes/myviragotrike.jpg
thanks

[odie]

Doing the same thing to a 535 as we speak.
Stripped down the bike yesterday, big pile of bits lying on my mates floor at the moment. :D
Rear swinging arm made, axle has been narrowed :D
The frame, swining arm, front and rear guard, tank etc are going to stove enammeled black (basicly any thing metal on the trike) with stainless fasteners fitted every-where.
Going to take a while due to money constraints but should be done eventualy!

[hardtailbiker]

you should be able to get 55mph top end out of that, have fun

[master_of_wishes]

hey odie, good swinging arm design,the 535 seem to ride well on the swinging arm design,is yours up on three?

[Mortis]

I'm sure the good people on this website would like to see that as several of them have Virago trikes.

http://yorkshiretrikers.co.uk/

[odie]

I'm sure the good people on this website would like to see that as several of them have Virago trikes.

http://yorkshiretrikers.co.uk/
Had a look at it a while back, couldnt get on with the "IAMTYPINGINCAPITALSWITHNOSPACESSTUFF!"
cheers
Odie

[odie]

hey odie, good swinging arm design,the 535 seem to ride well on the swinging arm design,is yours up on three?

Had dropped swinging arm in to check out fittings etc, goes in a treat, still got to put the up and over bar in for shock mounts, cannot do that till the axle is finaly narrowed (finishing that of tomorrow night) so that i can check distances / clearances etc.

[Mortis]

Had a look at it a while back, couldnt get on with the "IAMTYPINGINCAPITALSWITHNOSPACESSTUFF!"
cheers
Odie
That would be the Lancastrians who keep straying on to the site! :D

[odie]

That would be the Lancastrians who keep straying on to the site! :D
No that would be every-one! :eek: