PDA

View Full Version : GSXR750H engines and running gear


dodgyphil
12-09-2004, 09:26 PM
1 GSXR750H engine,suspected head gasket knackered (top end noisy anyhow)
starter,alternator etc all there,plus another stripped only missing pistons and rods. original front and rear ends all complete.
will split any/all of it or sell job lot,make me a reasonable offer
All located at Ashford Kent
cheers
Phil

phil210167@aol.com
07832 219855

Choprocker
12-09-2004, 10:57 PM
ow much for front end?
Presuming all there, yokes forks, wheel, brakes, discs, etc.
Cheers

dodgyphil
12-09-2004, 11:42 PM
give me til tonight to check and I'll be able to tell you what's what.ring me after 5 if that's OK
cheers
Phil

Choprocker
13-09-2004, 09:15 AM
Hey dodgy, dont spose you are interested in bike trailer are u?
lol, i know it out of the blue but just trying to get rid of 1 and thought if you needed/wanted 1 could do a swap on the gsxr bits you got.
Catch you l8r

JOE
13-09-2004, 05:45 PM
I'm after a front brake lever an' a left hand engine casing an' bolts. Any chance you could help me out.

dodgyphil
14-09-2004, 09:57 PM
chop,sent you private message
JOE can you check with your friendly neighbourhood Suzuki dealer ref the l/h casing,I have two here and if they're any use we can work something out but I'd rather you checked the fitment tnat me send you the wrong thing OK?
cheers lads
Phil

JOE
15-09-2004, 05:15 PM
The casing is the same for all oil cooled gsxrs, bandits (well 600 & 1200 anyway) and me gsxf which is what I'm takin' the casing from in the short term. If the 2 casings are different, let me know an' I'll contact a dealer, or if you can send us a couple of pics an' I'll tell you which one matches.
Cheers mate.... Joe

ps if it helps I don't mind sending down me knackered one to you for comparison.

dodgyphil
15-09-2004, 06:59 PM
can you tell me if there is a part no stamped inside the cover?
If so I'll check mine tomorrow for comparison
cheers
Phil

JOE
16-09-2004, 06:27 PM
must've been on the middle bit that got worn away - I'll check with a dealer tomorrow and get back to you mate.

dodgyphil
16-09-2004, 09:15 PM
when you got the details give me a call Joe,cos I'm not going to be too near a computer for a few days
cheers
Phil